Put the square spindle into the door handle and place through follower (Square hole in lock or latch) in door.
If your door handle has a split spindle make sure the split is vertical and the concave cut out is facing downwards. Do the grub screw up with the allen key provided. The grub screw in normally positioned under the handle.
Make sure the door handle is parallel to the door and mark the screw holes.
Remove the door handle and pre drill a pilot hole for the screws. This is necessary as most doors are made of dense wood and will damage the screws if this procedure is not followed.
Place the door handle with the bar back through the hole and attach the door handle with the screws provided.
Put the door handle on the other side of the door and mark the screw holes and repeat steps 2 to 5.
Your door handles are now fitted and ready to use.
