Sash Locks

Standard 3 lever sash lock with bolt through fixing holes for use in conjunction with our lock set door handles on backplate and our designer door handles on rose with a key hole escutcheon. Available in 63mm (2, 1/2 inch) and 76mm (3 inch) in electroplated brass, nickel plated and black.

We also offer Architectural 3 Lever Sash Locks if you would prefer them.

Available in 63mm (2, 1/2 inch) and 75mm (3 inch) in satin brassed and satin stainless steel. Can be used with our levers on rose when fitted with the back to back bolts. Supplied with standard rectangular striker plate and forend plate. Radiused plates are only required if you are using a router to cut the plate recesses and rebate kits are only required if you are fitting to french doors.

Complies to BS3621 (Insurance approved). Available in 63mm (2, 1/2 inch) and 75mm (3 inch) in polished brass and nickel plated. Supplied with standard rectangular striker plate, forend plate and keys. Rebate kits are only required if you are fitting to french doors.

Available in 50mm (2 inch), 63mm (2, 1/2 inch) and 75mm (3 inch) in polished brass and nickel plated. Supplied with standard rectangular striker plate, forend plate and keys. Rebate kits are only required if you are fitting to french doors.

For use with a euro or oval profile cylinder door locks. Available in 63mm (2, 1/2 inch) and 76mm (3 inch) in satin stainless steel and polished brass. Can be used with our levers on rose when fitted with the back to back bolts. Supplied with standard rectangular striker plate and forend plate. Radiused plates are only required if you are using a router to cut the plate recesses and rebate kits are only required if you are fitting to french doors.

These horizontal mortice sash locks are usually found on older victorian style properties they are available in 125mm and 150mm casie sizes in satin stainless steel and satin brass.