SKU
ELDBA/P

Tubular Mortice Dead Bolt

As low as £4.75
Tubular mortice deadbolt has a 5mm square spindle hole and can be used in conjunction with a bathroom thumb turn snib & release. Available in Satin Stainless Steel or Polished Brass finish
Tubular mortice deadbolt has a 5mm square spindle hole and can be used in conjunction with a bathroom thumb turn snib & release. Available in 64mm, 76mm, 102mm, 127mm and 152mm lengths in Satin Stainless Steel or Polished Brass finish. Dimensions match our Tubular Latches.
More Information
Brand Zoo
Fixings Included Yes
What’s Included Supplied complete with striker plate, forend plate, back box and screws.
Available Finishes Available in 2 finishes
Sizes Available 64mm/76mm/102mm/127mm/152mm
Backset 45mm/57mm/84mm/109mm/134mm
Case Width 15mm
Case Height 21.5mm
Case Length 64mm/76mm/102mm/127mm/152mm
Forend Height 58mm
Striker Plate Height 70mm
Striker Plate Width 40mm including lip

Locks & Latches

Normally a 2.5 inch / 64mm latch or lock or a 3 inch / 76mm latch or lock will be fine.

The length of the latch or lock determines the backset which is the distance from the edge of the door to the centre of the backplate on the door handle where the spindle passes through the door.

The backset on a 64mm latch or lock is approx 45mm and on a 76mm latch or lock is approx 57mm.

Useful Links

Write Your Own Review
You're reviewing:Tubular Mortice Dead Bolt
Your Rating
To Top