SKU
ELTLA/P

Architectural Tubular Latch

As low as £4.06
Architectural tubular latch with bolt through fixing holes, solid brass striker, striker plate back box and soft close latch. Available in 64mm, 76mm, 102mm, 127mm and 152mm lengths in Satin Stainless Steel or Polished Brass finish.
Rating:
Architectural tubular latch with bolt through fixing holes, solid brass striker, striker plate back box and soft close latch. These latches can be used with the majority of our door handles on rose and our door handle latchsets on backplate.
More Information
Manufacturer eHardware
Brand e-Hardware
Fixings Included Yes
What’s Included Supplied complete with striker plate, forend plate, back box and screws.
Available Finishes Available in 2 finishes
Type Architectural
Sizes Available 64mm, 76mm, 102mm, 127mm, 152mm
Backset 45mm, 57mm, 84mm, 109mm, 134mm
Case Width 15mm
Case Height 23.5mm
Case Length 64mm, 76mm, 102mm, 127mm, 152mm
Forend Height 58mm
Forend Width 25mm
Striker Plate Height 70mm
Striker Plate Width 40mm including lip
Follower Aperture 8mm

Locks & Latches

Normally a 2.5 inch / 64mm latch or lock or a 3 inch / 76mm latch or lock will be fine.

The length of the latch or lock determines the backset which is the distance from the edge of the door to the centre of the backplate on the door handle where the spindle passes through the door.

The backset on a 64mm latch or lock is approx 45mm and on a 76mm latch or lock is approx 57mm.

Useful Links

Product SKU's: ELTLA102PB , ELTLA102SS , ELTLA127PB , ELTLA127SS , ELTLA152PB , ELTLA152SS , ELTLA64PB , ELTLA64SS , ELTLA76PB , ELTLA76SS , ELTRA01PB , ELTRA01SS

Write Your Own Review
You're reviewing:Architectural Tubular Latch
Your Rating
To Top