SKU
ELTLS/P

Standard Tubular Latch

As low as £2.05
Standard tubular latch with bolt through fixing holes available in 64mm, 76mm or 95mm lengths in Nickel Plated, Brass Plated and Epoxy Black finish. Please note that the 95mm Tubular latch does not come with holes for the bolt through fixings.
Rating:
Standard tubular latch with bolt through fixing holes. These latches can be used with the majority of our door handles on rose and our door handle latchsets on backplate. Available in 64mm, 76mm or 95mm lengths in Nickel Plated, Brass Plated and Epoxy Black finish.
More Information
Brand e-Hardware
Fixings Included Yes
What’s Included Supplied complete with striker plate and screws.
Available Finishes Available in 3 finishes
Type Standard
Sizes Available 64mm, 76mm, 95mm
Backset 44mm, 57mm, 77mm
Case Width 13mm
Case Height 19mm
Forend Height 57mm
Forend Width 25mm
Striker Plate Height 57mm
Striker Plate Width 25mm (38mm including lip)
Follower Aperture 8mm

Locks & Latches

Normally a 2.5 inch / 64mm latch or lock or a 3 inch / 76mm latch or lock will be fine.

The length of the latch or lock determines the backset which is the distance from the edge of the door to the centre of the backplate on the door handle where the spindle passes through the door.

The backset on a 64mm latch or lock is approx 45mm and on a 76mm latch or lock is approx 57mm.

Useful Links

Write Your Own Review
You're reviewing:Standard Tubular Latch
Your Rating
To Top